Intimidated New User - Help

Konnected Alarm Panels
1

If I’m in the wrong place or community please direct me to the right spot, thank you.

I’m generally technically savvy, but having a tough time getting this figured out. The wires on my old board are not matching up to the videos. There is no guide or labeling on the wires, but there are zone notes on the keypads. I’m having a tough time working backwards from the zone notes to the screw numbers on the alarm panel. There are also some (jumpers?) that are making things confusing.

There are 3 keypads (front door, side door, master bedroom), not planning to use going with just the app. There is a glass break detector, not planning to use. There is a motion that I’m considering keeping.

The doors (entry and patio) are grouped together and I would like to separate them eventually. The windows can stay grouped.

There is a siren and some small communication box next to the panel.

Linking some pictures, can you help me figure out this mess of wires?

Keypad zone label reads: 1) entry doors 2) patio doors 3) motion 4) 1st floor windows 5) second floor windows 6) master bedroom 7) glass break 8) upstairs patio door

Wire pic 1 - https://drive.google.com/file/d/16tZGgAED4dHbhxrQknPMAjd0tlHqYmZ4/view?usp=sharing

Alarm panel type - https://drive.google.com/file/d/1NSYZM46jjEI6CpjbTJDkVpOJ7IR36_mU/view?usp=sharing

2

Congrats you have a very common Honeywell Vista 20P main board. Here is a link to the programming manual and on the last page it will give you a wiring diagram:

3

This is a HUGE help thank you. I took my image and noted the zones based on what was written in the keypad door. I was confused by where zone 1 started and the sharing of screws. I also better understand how all the doors and windows are grouped together now with a jumper. Thank you again for your help!

Questions:

I’m assuming screws 3&4 are the siren?

Can’t figure out what 5 is (better pic attached, but guessing I won’t need it?

Based on the notes and using the keypad door list does this look right how it’s noted, total assumption that the keypad door is correct?

5 wire pic - https://drive.google.com/file/d/1FB6y5pmw7wis0VnAsaSIDn-ZGcO9WEKP/view?usp=sharing

panel with notes - https://drive.google.com/file/d/1HvAVL5ij4nlg0HjswJSL_Zhh8pDlqljf/view?usp=sharing

Keypad zone label reads: 1) entry doors 2) patio doors 3) motion 4) 1st floor windows 5) second floor windows 6) master bedroom 7) glass break 8) upstairs patio door